18 articles Installation Page 2 / 2

5 – Installing your metering equipment (in Retail Stores)

  Wattics energy management solution for retail stores Step-by-step procedures for monitoring and benchmarking of HVAC, lighting and power outlets within/across stores. —  At this stage, you have done your site survey, put together your project proposal based on the electrical diagram, and you know which circuits you are going to monitor. If all went…

How to prepare for a successful electrical meter installation

This post provides a checklist of pre-installation requirements that must be taken care of before the meter installation date (electrical meters).   1. Get your labels right Electrical installations are generally the result of original installations combined with a number of changes and upgrades made over the years to accommodate site expansion or new business…

What we need to know to quote your energy efficiency projects

Partnering with Wattics means that you can now avail of our technical support in terms of metering and software requirements when putting together your project proposal. Depending on the complexity of the project at hand, the mix of calls, emails, photos and notes can quickly get messy. As such, we have tried to formalise the…

How to survey an electrical installation for metering and targeting?

Sites’ layout and electrical installations are unique, most customers do not exactly know what they want to monitor, and many customers have pre-existing metering installations that must be integrated. Any monitoring and targeting project therefore starts with a site survey to learn the status quo.   Site surveys must be carried out to define the…

What to do if your Wattics system has gone offline

Your Wattics system has gone offline, and the last data shown on your dashboard is more than 15mn old. This page has basic steps to help you to fix some common issues that may explain why your Wattics system is offline. Most issues can be fixed by following the steps below. Just start at the…

What are the installation steps when using the Wattics Octopus Gateway

The procedure to follow when installing the Octopus Gateway unit involves 6 steps:   You install the Wattics Octopus Gateway unit and connect your meters and sensors to the available inputs (RS485, TCP, analog/digital inputs) You configure data collection from the meters and sensors using the Wattics Octopus configuration tool You fill in the Octopus…

Do you know electricians who can install the meters

The installation of metering equipment within your premises must be conducted by an electrician – and we know who to call. Wattics has built a network of certified electricians throughout the Republic of Ireland and abroad that can work with you to install our metering system with minimum disruption to your business. Contact us if…

How to install your WattREV-6 meter (3P4W Wye)

This post illustrates how to install your WattREV-6 meter on a 3-phase 4-wire (three phases with a neutral) Wye/Star electrical systems typical to European member states, UAE, Malaysia, China and more. Separate installations steps must be requested at support@wattics.com for other electrical systems and if other metering equipment is deployed.     Installation must take…

  • Page 2 of 2
  • 1
  • 2